Directed Electronics 24927 car remote starter system with keyless remote

Description

Car Sounds Electronics
Directed Electronics 24927 car remote starter system with keyless remote
Free Shipping to 48 Contiguous US States!
Product Description
***************************************************************** Directed Electronics 24927 car remote starter system with keyless remote ***************************************************************** Free Shipping to the 48 Continental States This is ONE (1) Aftermarket keyless remote control transmitter that will work once programmed to sync with your vehicle's compatible aftermarket installed security system. Programming Instructions: Follow the procedure below to add remotes to your Ready Remote 24927 system:1. Turn ignition to ON position.2. Within 5 seconds, press the valet switch once then press again and hold it.3. After 2 seconds the LED flashes once, pauses, then flashes again. Within 15 seconds, press the * button on remote you want to program.4. Repeat step 3 for each remote you wish to program to a total of 4.5. Take key out to exit programming.Compatibility: To make sure this will work with your installed alarm keyless entry system1. Does it look like your remote? and if not/ scroll below to COMPATIBILITY - is your system listed there?2. Does it have the same color led light?Attention: Please note there are several compatible remotes that look similar but not exactly like the photo pictured. We will do our best to ship you the remote pictured; however, the remote you receive may look different than the remote pictured. No worries, the board will program to your system the same. ---------------------- ADDITIONAL INFORMATION ---------------------- Attention: Condition Explanation: Pre-Owned Pre-Owned: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. Scroll through listing for full details and description of any imperfections. _____________________________ Programming Instructions: Your system can learn up to 4 transmitters. The following procedure will show you how to add additional transmitters or replace old ones. Each transmitters can be programmed one button at a time or you can use an auto learn procedure that learns the intended factory configuration. Learning one button at a time is generally only used when using one transmitter to control two different cars. Being able to program functions to different channels on each transmitter prevents multiple cars from responding simultaneously. 1. Turn the ignition ON 2. Press/release the momentary switch the same number of times as the desired transmitter learn Step number, and then Press/HOLD. 3. After holding the momentary switch for 2 seconds the LED will begin to flash to indicate of the accessed transmitter learn Step. 4. Press the transmitter button that you want to control the function assigned to that transmitter learns Step; the Horn/Siren will emit a long chirp. Please Note: For transmitter learn Step #1, you must press the (*) button on the transmitter, this will automatically program the transmitter buttons to the default function configuration. You can learn more than one transmitter function at a time by advancing to another transmitter learn Step. To do this, first release the momentary SW and then press/release it the same number of times as the difference between the current transmitter learn Step and the desired transmitter learn Step, and then press/HOLD it. After Holding the Valet SW for 2 seconds the LED will flash 8 times and repeat. You can now learn a transmitter button to step 8. There are several ways to exit transmitter Learning, by TimeOut, Ignition or momentary SW Presses. 1. TimeOut: If more than 15 seconds elapse between momentary SW presses or transmitter signals 2. Ignition: If the Ignition is turned off at any time during transmitter Learning. 3. Momentary SW presses: if you press/release the momentary SW more times than the number of transmitter Learning steps in the menu. The Horn output will pulse 5 times rapidly and the Led will turn off to indicate exiting feature programming. * All remotes include working batteries (except case-only purchases) * A purchased remote needs to be programmed after you receive it in order to work with your specific vehicle -------------- SPECIFICATIONS -------------- ConditionPre-Owned 615Apo9FCC IDEZSDEI26171FCC ID EZSDEI26171 EZS-DEI26171, EZS DEI26171, EZSDEI26171, EZSDEI26I7I, EZSDE126171, EZ5DEI26171 DEI Headquarters, Inc. ASK Transmitter DEI26171 This remote has an FCC ID of EZSDEI26171. This Ready Remote is made by Autocommand/Designtech which is now under DEI. The transmitter part number for 26161 for the 3 button and 26171 for the 5 button remote. This remote's frequency is 434 MHz. The red LED activates when you press one of the buttons. The system will accept a total of 4 remotes. Part#26171Dealer part #Buttons5: Lock, Unlock, Aux, Light, Start; LED RedFrequency433 - 434 MHzBattery Type1: GP23A
{{itemfeatures}}
Returns Policy
Damaged televisions and appliances must be refused upon delivery. Once refused, we’ll ship you replacement merchandise at no cost to you. Non-damaged televisions and appliances may be returned within five business days for a credit less two-way shipping and 10% restocking fees. Damaged merchandise that are not televisions or appliances may be returned within one business day of receipt for an exchange. Non-damaged merchandise that are not televisions or appliances may be returned within five business days for a credit less two-way shipping.
You may return your item(s) for refund within 30 days of receipt of your shipment.
You may return your item(s) for replacement within 30 days of receipt of your shipment.
We do not ship any replacements before we receive and inspect the returned merchandise.
Please read our policy carefully as we cannot process a return in the unfortunate event that the below conditions are not met.
We are an authorized online dealer offering quality products from reputable brands. However, we are aware that customers may not always be satisfied with their purchase.
You may return merchandise purchased from Car Sounds Electronics for a refund or a replacement, provided that the procedures and requirements are followed.
All returns require a return merchandise authorization (RMA) number.
An RMA number must be issued within 30 calendar days after the date of purchase.
To initiate your return, please call us or email us.
Merchandise must be in its original condition and packaging.
Merchandise must contain the original UPC codes.
Merchandise must contain the original serial numbers.
UPC codes and serial numbers cannot be altered or tampered with in anyway.
Packaging must include all peripherals, warranty cards, instruction booklets, paperwork, and any other contents that were included in the original packaging.
REFUNDS
We do not charge any restocking fee for merchandise that are returned for a refund. Customers are however responsible for return shipping costs and merchandise must be in its original packaging and condition.
Used or opened items are not eligible for a refund.
Refunds are applied to the payment method used at the time of purchase 5-10 days after we have received your returned merchandise. We will only refund the value of the returned merchandise minus
our shipping cost.
EXCHANGES
If you would like to exchange a purchased item, you may exchange your item for equal value.
Please note that only items that have not been opened or used will be considered eligible for an exchange. Customers must include a copy of their professional certified installer receipt and note stating what is wrong with the unit.
If you would like to exchange your purchased item for an item of a higher value, you are responsible for paying the difference. If you would like to exchange your purchased item for an item of a lower value, we will refund you the difference. You are responsible for shipping your purchased item back to us. However, we will cover the shipping costs of shipping the new item out to you.
WARRANTY RETURNS
For items covered under our warranty, please first call us or email us to receive an RMA number. Upon receiving and inspecting your returned merchandise, we will ship your replacement item out to you. You are responsible for shipping your purchased item back to us. However, we will cover the shipping costs of shipping the replacement item out to you.
DEFECTIVE OR D.O.A MERCHANDISE
Merchandise that is discovered to be defective upon receipt will be replaced with the same model. You must contact us within
72 hours
from the date of receipt for all defective merchandise claims. You may ship the defective item back to us and we will either fix the item or ship you a replacement. You must allow us
48 hours (not including weekends)
, to inspect and fix the defective item(s).
LARGE MERCHANDISE
We encourage you to thoroughly inspect your order upon receipt. All merchandise must be signed by an adult upon delivery. Customers are responsible for their products after signing for it. Large Merchandise includes the following:
Televisions larger than 32 inches in size
Furniture and any other oversized products
Certain special order items
DAMAGED MERCHANDISE
If you receive a damaged product you must contact us within
24 hours
. You must also contact UPS to verify that the product was damaged. Upon verification we will issue you a replacement. We will cover the return shipping cost as well as the cost of shipping the replacement item to you.
INCORRECT MERCHANDISE
If for some reason the item that you receive does not match the item that was purchased, please contact us immediately. This would be a blatant mistake on our part and we will cover the return shipping cost. Upon receiving and inspecting your returned merchandise, we will ship out the correct item to you.
RETURN SHIPPING COSTS
The cost to shipping merchandise back to us is not reimbursable. You are responsible for all return shipping costs, however there are a few exceptions:
1.
If you received a defective item, we will replace the item. We will cover the shipping cost of returning the defective merchandise to us. We will also cover the cost of shipping the replacement product to you.
2.
If you received a damaged package you must contact us within 24 hours. You must also contact UPS to verify that the package was damaged. Upon verification we will issue you a replacement. We will cover both your return shipping cost and the cost of shipping the replacement product out to you.
3.
If you received an incorrect item that does not match the item that was purchased. We will cover the shipping cost of returning the incorrect item to us. We will also cover the cost of shipping the replacement product to you.
RETURN EXCEPTIONS
Our return policy is rather lenient mainly for the benefit of our customers. The following items however, are not eligible for returns:
Any product not purchased from Car Sounds Electronics.
Any product without a valid, readable serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number.
Any product that is returned without
all
original packaging and accessories, including the retail box, manuals, cables, and all other items originally included with the product.
Any product from which the UPC code has been removed from its packaging.
Any product that exhibits physical damage or abuse.
Any car audio equipment that has been installed or where the wires have been cut.
Please note that products that are not eligible for return for any of the above reason(s) will be sent back to you at your cost and expense.
HOW DO I RETURN AN ITEM?
Step 1: Contact Us
Please email us or contact us via phone (Monday-Friday, 9:00AM-5:00PM Eastern Time) to receive an RMA number. Please have your order number ready when contacting us.
Step 2: Carefully Pack Your Item
Please safely package the merchandise in its original packaging with all its original contents.
Step 3: Locate the Nearest Shipping Outlet
You may contact the following carriers:
UPS: (800) 742-587
USPS (Post Office)
Step 4: Ship the Item Back To Us
Please cover or remove any old shipping labels and tracking numbers and ship your return merchandise to the address provided when you obtain your RMA number. Please note that we cannot be held responsible for any return that gets lost or damaged on its way back.
Remember, returned merchandise that is lost or damaged during transit is solely the shipper’s (your) responsibility. We urge you to save the tracking information and properly insure all merchandise being returned to Car Sounds Electronics.
Shipping Policy
We provide free shipping to all 48 continental states. Free shipping does not include Alaska, Hawaii, Puerto Rico, Guam or Canada. We encourage these customers to contact us for more information.
P.O. Boxes or APO/FPO
Unfortunately we currently do not ship to P.O. Boxes or APO/FPO addresses.
International
Shipping
Our international customers may use a third-party carrier to handle their shipping. We recommend Bongo International. Please note that although we are responsible for getting your product from our warehouse to your carrier, any event that follow is the responsibility of the customer (you) and your third-party carrier. You are responsible for hiring the third-party carrier and any transaction or agreement involves the customer (you) and the carrier, and does not include Audio Jam Inc.
International customers are also solely responsible for any and all customs, import duties, brokerage fees, and taxes.
Domestic
Shipping
We ship every business day that UPS and USPS are in operation. Any package exceeding one pound (1 lb.) in weight will be shipped via UPS while any package less than one pound (1 lb.) will be shipped via USPS. Any item purchased and paid for by 8:00am EST will typically be shipped on the same business day. Any item purchased and paid for after 8:00am EST will typically be shipped the next business day. Any item purchased and paid for after 8:00am EST Friday and through Sunday will be shipped on the
next business da
y. Please note that we will only ship items to confirmed shipping addresses.
Shipping Procedure
and Overview
After making your purchase and the ordering process is completed, please allow sufficient time for you order to be shipped and delivered to you. As noted above, domestic packages that weigh less that
one pound (1 lb.) will be shipped via USPS. All domestic packages that exceed one pound (1 lb.) in weight will be shipped via UPS.
If you have not received your tracking or shipping information please call us or email us.
Warranty Policy
We offer
one (1) year
full warranty on all
NEW
items we sell, unless specified otherwise in listing details.
WARRANTY IS VOID IF:
Any product without a valid, readable serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number.
Any product that exhibits physical damage or abuse. For example: Burned voice-coil in speakers or subwoofers is physical damage and is not covered by the warranty.
© 2022 Car Sounds Electronics