Fortin EVO-FORT1 Plug & Play Remote Starter Select Ford Lincoln Mercury Mazda

Description

Now choosing the right remote start system and installing it in your vehicle has become a lot simpler and more affordable with this all-in-one Fortin EVO-Series package. The Fortin EVO system includes a digital interface module, which bypasses your vehicle's immobilizer circuits so you can start it without a key, and a T-harness that'll connect the module to your specific vehicle.
While not quite plug-and-play, the harness connections cut down installation time considerably, so you do-it-yourselfers out there can save a little money. Fortin includes a code on the package that you use on their website to download and print detailed, illustrated instructions for your installation.
You start your vehicle by pressing the lock button on your factory key three times. This system lets you start your car from as far away as the key will lock and unlock your doors.
We are selling
Brand New - Sealed - Never Opened - Complete:
Fortin EVO-FORT1 Plug & Play Remote Starter for Select Ford / Lincoln / Mercury / Mazda
EVO-ALL module & T-Harness combo for select Ford, Lincoln, Mercury and Mazda vehicles 2007 and up. The EVO-FORT1 is the ultimate Factory Fit, ALL-IN-ONE data immobilizer bypass, door lock, alarm & remote start interface with T-Harness combo module for select vehicles. It raises the standard of hassle-free installation convenience to a whole new level. It uses a multiple bus architecture with ten separate communication ports that provide complete functionality on every supported vehicle.
Product Features
3 x On-board LEDs for simplified programming and diagnostics.
1 x Factory Fit T-Harness for an easy install.
1 x 2-way datalink port for data-to-data (RS-232) communication with compatible remote-starters and security-systems.
1 x 20 Pin general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems.
The self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly.
Product Specifications
3 x CAN-Bus controllers.
3 x General purpose controllers (J1850, Class 2, encrypted key etc.).
1 x On-board relay (SPDT).
1 x On-board relay (DPDT).
1 x Analog controller 0-12VDC @ 20mV steps (Pass-lock, MUX)
Parts Included
1 x EVO-ALL control module
1 x Warning label
1 x 4 Pin 2-way data-link harness
1 x Factory Fit THAR-FORT1 T-Harness
Please use the Fortin Website to check compatibility with your vehicle before purchasing
A firmware update is required for the module to support a specific vehicle using the Fortin Flashlink ( sep purchase )
Uses the factory key to start vehicle remotely;
Select vehicles will require an RF kit for remote starting