Fortin EVO-FORT3 T-Harness Remote Start Bypass Module for Ford Lincoln

Description

**The flashlink4 program cable (sold seperatly) is required to set up this module to be used as a stand alone remote starter.
The EVO-FORT3 is the ultimate Factory Fit, ALL-IN-ONE data immobilizer bypass, doorlock, alarm & remote start interface with T-Harness combo module for 2013+ Ford vehicles.
It raises the standard of hassle-free installation convenience to a whole new level. It uses a multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.
PRODUCT FEATURES
3 x On-board LEDs for simplified programming and diagnostics.
1 x Preloaded firmware for maximum compatibility. [1]
1 x Factory Fit Gateway style T-Harness for easy install.
1 x 2-way datalink
**The flashlink4 program cable (sold seperatly) is required to set up this module to be used as a stand alone remote starter.
The EVO-FORT3 is the ultimate Factory Fit, ALL-IN-ONE data immobilizer bypass, doorlock, alarm & remote start interface with T-Harness combo module for 2013+ Ford vehicles.
It raises the standard of hassle-free installation convenience to a whole new level. It uses a multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.
PRODUCT FEATURES
3 x On-board LEDs for simplified programming and diagnostics.
1 x Preloaded firmware for maximum compatibility. [1]
1 x Factory Fit Gateway style T-Harness for easy install.
1 x 2-way datalink port for data-to-data (RS-232) communication with compatible remote-starters and security-systems. [2]
1 x 20 Pin general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems.
Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly.
PRODUCT SPECIFICATIONS
3 x CAN-Bus controllers.
3 x General purpose controllers (J1850, Class 2, encrypted key etc.).
1 x On-board relay (SPDT).
1 x On-board relay (DPDT).
1 x Analog controller 0-12VDC @ 20mV steps (MUX).
PARTS INCLUDED
1 x EVO-ALL control module (firmware preloaded). [3]
1 x Warning label. [3]
1 x 20 Pin general purpose harness. [4]
1 x 4 Pin Fortin 2-way data-link harness. [2]
1 x Factory Fit GATEWAY T-Harness. [4]
LEGEND
[1] A firmware update may be required for the module to support newest vehicles.
[2] Using the 2-way datalink port with an equipped remote-starter, security-system or RF-KIT greatly simplifies installation.
[3] Updated firmware and installation guides are posted on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.
[4] Secure Clip Harness.