Fortin EVO-RS for Audi Plug & Play Remote Starter

Description

EVO-ALL module & T-Harness combo for select Audi vehicles. The EVO-AUDT1 and EVO-AUDT2 are the ultimate Factory Fit, ALL-IN-ONE data immobilizer bypass, door lock, alarm & remote start interface with T-Harness combo module for select Audi vehicles.
It raises the standard of hassle-free installation convenience to a whole new level. It uses a multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.
Product Features
3 x On-board LEDs for simplified programming and diagnostics.
1 x Factory Fit T-Harness for easy install.
1 x 2-way datalink port for data-to-data (RS-232) communication with compatible remote-starters and security-systems.
[2]
1 x 20 Pin general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems.
Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly.
Product Specifications
3 x CAN-Bus controllers.
3 x General purpose controllers (J1850, Class 2, encrypted key etc.).
1 x On-board relay (SPDT).
1 x On-board relay (DPDT).
1 x Analog controller 0-12VDC @ 20mV steps (Pass-lock, MUX).
Parts Included
1 x EVO-ALL control module.
[1]
[3]
1 x Warning label.
[3]
1 x 4 Pin 2-way data-link harness.
[2]
1 x Factory Fit T-Harness (THAR-AUD1 or THAR-AUD2).
[4]
Legend
[1]
A firmware update is required.
[2]
Using the 2-way data-link port with an equipped remote-starter, security-system or RF-KIT greatly simplifies installation.
[3]
Updated firmware and installation guides are posted on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.
[4]
Secure Clip Harness.
[5]
Refer to vehicle compatibility page. Some vehicles may still require a key for remote starter installation.