Shine Supply UTV Cleaning Kit, Shine Supply High Pressure Foam Gun

Description

Shine Supply UTV Cleaning Kit
INCLUDES
(1) Clutch silica spray 16oz
(1) Hole Shot complete off-road cleaner 16oz
(1) Clean n' Shine cleaner & conditioner 16oz
(1) Hot Shot Soap 16oz
(1) Soft Bristle Wheel Brush
(1) Large White Applicator Pad
(1) Large Blue Microfiber Applicator Pad
(4) Red Taddy Towels
Garden Hose Foam Gun
OPTIONS
Choose your foam gun based on your water supply!
If you're using a pressure washer get the
High Pressure Foam Gun
,
while if you're using a hose at normal residential water pressure then pick the
Garden Hose Foam Gun
.
INSTRUCTIONS
Before starting: Fill foam gun bottle to the “soap” line indicated on the bottle with Hot Shot soap and fill the rest of the bottle with water.
Pre-rinse your UTV with water to remove the loose dirt.
Spray wheels, tires, suspension and heavy soiled areas with Hole Shot complete bike cleaner.
Using the foam gun, foam down all exterior/interior surfaces.
Use the soft bristle wheel brush to scrub the wheels, tire and suspension. Use a wash mitt to scrub down the plastic surfaces, seats and floors.
Rinse and dry all surfaces. (Always use caution when rinsing the dashboard components to avoid causing any damage.)
Spray Clutch silica spray onto the large grey applicator pad and wipe down all exterior plastics, roll cage, wheels and suspension. For tight areas, spray Clutch directly onto the surface and wipe in with the grey applicator.
While the Clutch is setting up, open up the doors and wipe all the seats, floors and dash down using Clean N Shine and the Large White Applicator Pad. (Use one of the included microfiber towels with Clean N Shine if the interior needs additional cleaning)
Use (2) microfiber towels to remove/level the Clutch silica spray. One towel for initial wiping and the second towel for final leveling.